- Home
- Accessories & Spares
- Bike Brake Cables
- Gore Ride On Brake Cable Kit
Gore Ride On Brake Cable Kit
Product Description
Gore Ride On Brake Cable Kit
Features:
- Professional system
- The Professional System combines the lowest friction coating technology with cable-protecting components to ensure long-lasting, perfect braking for the highest performing road bikes
- A new, specially formulated cable coating is matched with a proprietary housing lubrication - the result is the sharpest cable actuation to date
- Cable is protected from the elements by ultra-long nosed ferrules and Grub seals, guaranteeing consistent performance
- Cable housing is compatible with all major brands of road brakes
Magazine Review
Review from road.cc : 16 December 2010
Rating: 4.5 Stars
These top end Ride-on brake cables from Gore would be the perfect complement to a smart road bike. At £45.99 they're not cheap, but given their performance they're worth the money.
The principle of the system is to eliminate friction and prevent corrosion. The cables themselves have a non-stick coating, the outer cables have a non-stick liner, and the whole system is sealed with rubber grub seals. Even the length of cable along the top tube is covered with a plastic protector attached to the ferrule. In fact, about the only bit of cable that should see the light of day is the last inch that runs from the brake calliper to the end cap… and even the end caps are protected with cute little rubber socks.
All of that protection should keep corrosion, and hence friction and braking deterioration, at bay for ages. Gore offer a one-year warranty on these cables but they should keep you going for way longer than that.
A measure of the care that has gone into the design is that the end section of the cable outer has a clear rubber casing, which is notably softer and bendier than the rest of the outer. That's to make life easier with modern brake levers, where the cable exits from the back of the lever and runs under the bar tape: the bendy section lies nicely along the curve of the handlebar.
What if you don't have modern levers? Not a problem. I fitted the cables to my 1974 Carlton, which has old-fashioned levers where the cable exits from the top of the brake hood. You just snip off the clear section and use the grey plastic reinforced section to fit into the lever tops. It took me a while to realise why the outers had a clear bit joined to the rest by an inch of harder grey plastic. When I understood, it all made sense. A nice touch.
For the sake of reviewing accuracy I should confess that the plastic ferrules didn't actually fit the cable guides on my old frame. But once set up, the brakes were incredibly smooth. Pulling the lever didn't distort the cable at all, which suggests that virtually no energy is lost to friction within the system.
Smoother than a polished eel and just as slippery, these cables are a perfect upgrade for any road bike.
Verdict
Lovely smooth cables - trouble-free braking practically guaranteed.
Rating: 4.5 Stars
These top end Ride-on brake cables from Gore would be the perfect complement to a smart road bike. At £45.99 they're not cheap, but given their performance they're worth the money.
The principle of the system is to eliminate friction and prevent corrosion. The cables themselves have a non-stick coating, the outer cables have a non-stick liner, and the whole system is sealed with rubber grub seals. Even the length of cable along the top tube is covered with a plastic protector attached to the ferrule. In fact, about the only bit of cable that should see the light of day is the last inch that runs from the brake calliper to the end cap… and even the end caps are protected with cute little rubber socks.
All of that protection should keep corrosion, and hence friction and braking deterioration, at bay for ages. Gore offer a one-year warranty on these cables but they should keep you going for way longer than that.
A measure of the care that has gone into the design is that the end section of the cable outer has a clear rubber casing, which is notably softer and bendier than the rest of the outer. That's to make life easier with modern brake levers, where the cable exits from the back of the lever and runs under the bar tape: the bendy section lies nicely along the curve of the handlebar.
What if you don't have modern levers? Not a problem. I fitted the cables to my 1974 Carlton, which has old-fashioned levers where the cable exits from the top of the brake hood. You just snip off the clear section and use the grey plastic reinforced section to fit into the lever tops. It took me a while to realise why the outers had a clear bit joined to the rest by an inch of harder grey plastic. When I understood, it all made sense. A nice touch.
For the sake of reviewing accuracy I should confess that the plastic ferrules didn't actually fit the cable guides on my old frame. But once set up, the brakes were incredibly smooth. Pulling the lever didn't distort the cable at all, which suggests that virtually no energy is lost to friction within the system.
Smoother than a polished eel and just as slippery, these cables are a perfect upgrade for any road bike.
Verdict
Lovely smooth cables - trouble-free braking practically guaranteed.
Write your own product review
Product Reviews
Related Products
-
Categories
-
Shop Information
-
Important Links
-
Contact Global Bike
Unit 1B, Canalside
Tattenhall,
Chester,
Cheshire,
CH3 9BD- Telephone: 01829 770 844
- Email: hi@globalbike.co.uk
- Fax: 01829 495 056
- VAT Reg: 981 8287 71
- Company Reg: 695 4566